The Ultimate Leak Detection System for Heat Exchangers

Protect product quality with the ultimate leak detection system for heat exchangers.

The Accusense System uses Helium as an established and highly effective non-destructive testing method for plate and tubular heat exchangers. Unlike conventional methods (i.e. dye penetrant) the Accusense System does not require the heat exchanger to be stripped or opened, reducing down time while detecting pin size holes down to 5 microns.

Accusense Image

This proven method uses Helium gas as it not only has the second smallest atom size, but is also easily detectable. This unique patented process allows for the discovery of faults before they become problematic. Costly down time can be eliminated with a planned preventative maintenance schedule.

The use of Helium has additional benefits in that it is safely dispersed, leaves no residue, is non toxic and does not stress the plate pack with high pressures. This method is very quick, efficient and only takes on average 5 minutes a section after initial setup to test a standard heat exchanger, therefore making a very cost effective solution to inspection needs within many industries.

Contact us today to schedule your preventative maintenance!

 

A revolution in process systems.

From start to finish, our turn-key approach to process systems means you don't have to go anywhere else.

Give us a call

Let us tell you more about the
Trans-Market difference.

1-800-282-8808

Click here to send us a message